The watch belongs to the Deville series. It is the same size as other disc flying watches. The 41 mm watch is very suitable for the wrists of the Chinese people. As long as it is worn around 16 to 17.5, there is no sense of disobedience. Sapphire mirror, the case is different from the traditional material, using a whole piece of glass as the main body, the ring design, that is, "360 degree perspective case body", the side can clearly see the movement of the movement. The dark blue dial has a radial pattern and the three needles are located in the center of the dial, which is simple and generous. The 3 o'clock is the calendar window. Gdwatchclone - The website to get good Omega clone watches online, best replica watches.
The biggest highlight on the dial is the color. The different angles will be from deep to light and very strong radiation, which will make different blues in different light. These are not particularly obvious in 3S, and the reduction is very good. . A good radiation pattern must be when you turn the watch. It will emit a faint aperture and it will be difficult to find its texture. If you can see the lines clearly at a glance, it is unqualified. Relatively low end. In terms of color difference, it is very difficult to do the same thing with any color. The color is very difficult to adjust. If you look at it, there is still a little color difference, but this little color difference has to add a lot of external factors. For example, the angle of light, etc., so if there is no obsessive-compulsive disorder, it can basically be considered that it is zero-chromatic, which is a very difficult process.
The structure is very complicated, the logo below the 12 o'clock position, the stud scale, and the track discs are all separated. VS is to fix the logo on the dial with rivets, showing a three-dimensional effect. The stud scale is also the same method. The rivet is used to fix the scale on the track ring, and then the track ring is fixed on the surface. It seems complicated, but the whole three-dimensional feeling can be presented. There is a detail here. If the deviation between the production of the nail and the production of the orbital disc is large, there must be a place and a literal fit. The bright blue of VS does not appear at any angle, which reflects the VS factory. The attitude problem, the details determine success or failure. The previous V6 and 3S literals are formed once, and the scales and logos are glued together. This gives the three-dimensional sense, and it directly reflects two problems. There is a scale logo sticker, and the outer ring scale is not aligned. The small scale of the literal, followed by the sticky scale of the glue in the bump or the high temperature caused the nail to fall off, these VS are all considered, and improved.
The biggest highlight on the dial is the color. The different angles will be from deep to light and very strong radiation, which will make different blues in different light. These are not particularly obvious in 3S, and the reduction is very good. . A good radiation pattern must be when you turn the watch. It will emit a faint aperture and it will be difficult to find its texture. If you can see the lines clearly at a glance, it is unqualified. Relatively low end. In terms of color difference, it is very difficult to do the same thing with any color. The color is very difficult to adjust. If you look at it, there is still a little color difference, but this little color difference has to add a lot of external factors. For example, the angle of light, etc., so if there is no obsessive-compulsive disorder, it can basically be considered that it is zero-chromatic, which is a very difficult process.
The structure is very complicated, the logo below the 12 o'clock position, the stud scale, and the track discs are all separated. VS is to fix the logo on the dial with rivets, showing a three-dimensional effect. The stud scale is also the same method. The rivet is used to fix the scale on the track ring, and then the track ring is fixed on the surface. It seems complicated, but the whole three-dimensional feeling can be presented. There is a detail here. If the deviation between the production of the nail and the production of the orbital disc is large, there must be a place and a literal fit. The bright blue of VS does not appear at any angle, which reflects the VS factory. The attitude problem, the details determine success or failure. The previous V6 and 3S literals are formed once, and the scales and logos are glued together. This gives the three-dimensional sense, and it directly reflects two problems. There is a scale logo sticker, and the outer ring scale is not aligned. The small scale of the literal, followed by the sticky scale of the glue in the bump or the high temperature caused the nail to fall off, these VS are all considered, and improved.
